Artwork Guide

Use the points below info as a guide when you're preparing artwork for a Custom Design Wax Seal Stamp.

  • Safe area: keep typography and graphic elements at least 2mm from the edge unless you want to run your design over-the-edge.
  • Bleed: add a 1mm bleed if you're running your design over-the-edge
  • Dieline: 24mm or 30mm in diameter (you can supply your artwork larger and we'll resize it for you). Place artwork within a guide circle to indicate placement
  • Typography: minimum 6pt (or about 1.4mm height) or larger
  • Lines/strokes: There's no minimum thickness and you don't need to adjust your artwork to make graphic elements thicker
  • Spacing: keep spaces/gaps in your design at a minimum of 0.18mm to avoid engraved areas blending together
  • Convert fonts to outlines: or won't be able to see your artwork in the same way you do
  • Black and white: don't use colour, gradients or backgrounds in your artwork
  • File type: for best results your design should be in vector format, but if an image is used it should be 300 DPI minimum. We recommend and prefer .AI, .EPS and .PDF vector files for the best results

 A couple of extra notes...

  • Don't upload small, pixelated, blurry images or screenshots from your phone (upload the actual image file)
  • Don't reverse or flip your artwork: that's our job

 

Images
Using images to create Wax Seal Stamp designs

Avoid using photos, overly detailed or hand drawn illustrations and coloured images.

Typography
Using typography/fonts in Wax Seal Stamp designs

Avoid low-resolution and pixelated images, very small typography and closely spaced graphic elements.

We'll send you an artwork proof for you to check and approve. We won't engrave anything that won't work we'll let you know if there are any problems with your artwork.

If you have any questions or you're not sure if your logo or design will work well as a wax seal stamp, ask us and we'll help you out.